Oscillating Bearing GE140 ES

Joint bearings are widely used in engineering, hydraulic oil cylinder metalforming machine, engineering machinery, automation equipment, automotive shock absorber, water conservancy machine, etc.

For joint bearings spherical sliding large contact area, gradient is big, also because most joint bearings taking special processing methods, such as surface phosphating, galvanized, chrome or external sliding surface, with mat, spraying the lining.

So have larger load capacity and impact resistance ability, and have corrosion resistance and wear, self-aligning, lubrication good or self-lubricating non-lubricated dirt pollution characteristics, even install dislocation also can work normally. Therefore, joint bearings are widely used in speed lower swing motion, tilt movement and rotation movement.

2.The series of spherical bearing

(1) GE... E model sheet, no lubrication oil every outer. Can bear radial load and any direction of smaller axial load.

 
(2) GE... ES type, single slit outer oil lubrication. Can bear radial load and any direction of smaller axial load.

 (3) GE... ES - 2RS type, single slit outer oil lubrication, with seals at both. Can bear radial load and any direction of smaller axial load.

(4) GEEW... ES - 2RS type, single slit outer oil lubrication, with seals at both. Can bear radial load and any direction of smaller axial load.

(5) GE... Single slit invading.this ESN type, have lubrication oil tank, the outer ring have moved. Can bear radial load and any direction of smaller axial load. But axial load overwhelmed by stop ring, the axial load capacity reduction.

(6) GE... XSN type a double-slit outer profile especially circle), (oil lubrication is a stopper, outer oil dynamic slots. Can bear radial load and any direction of smaller axial load. But axial load overwhelmed by stop ring, the axial load capacity reduction.

(7) GE... The HS type inner circle have lubrication oil, abrasion, double half outside after clearance can be adjusted. Can bear radial load and any direction of smaller axial load.

(8) GE... DE1 type inner circle for hardened bearing steel, steel for bearing outer ring. , assembling, extrusion circle has lubricating oil and oil hole. Inner diameter less than 15mm bearing, no lubricating oil and oil hole. Can bear radial load and any direction of smaller axial load.

(9) GE... DEM1 type inner circle for hardened bearing steel, steel for bearing outer ring. , assembling, extrusion circle, after the bearing load bearing outer ring pressed on the ditch make bearing the axial fixation. Can bear radial load and any direction of smaller axial load.

 
(10) GE... DS type outer ring have assemble slots and lubricating slots. Limited to large size bearings. Can bear radial load and any direction of smaller axial load (assembly slot side cannot bear axial load)