8'' high head borehole submersible pump

Model Description:

For example:  AT 200 QJ 80 -136 /8

AT: abbreviation of Chinese Aote (Enterprise Standard)

200: minimum well inner diameter

Q: submersible

J: for well use

80: flow capacity 80m3/h

136: head 136m

8: eight-stage impellers connection

Note: This sample covers all our recommended models of enterprise standard, meanwhile we are available from stock for all the models of the national standard.

Material:

Delivery casing:

Non-corrosive medium: cast iron HT200;

Mildly corrosive medium: anticorrosive coating, chemical;

Moderately corrosive medium: stainless steel 304;

Strongly corrosive medium: stainless steel 316, stainless steel 316L, tin bronze 3861.

Shaft: choose the material according to the medium. Cold-drawn steel with chrome plating shaft used in non-corrosive medium, 2Cr13 suitable for moderately corrosive medium, duplex stainless steel applied to strongly corrosive medium.

Bushing: the enterprise special patent technological

Technical parameters:

Max outer diameter: 184mm

Outlet diameter: DN50, DN80, DN100, DN125

Outlet flange parameter: 8 M12×55 threaded studs, center distance: 150mm

In order to facilitate your specific product requirements, we make the following form of technical parameters.(Note: only includes part of this type of products)

Applications:

The deep well submersible pump's application is more widespread than the common centrifugal pump. They are suitable for agricultural irrigation, mining drainage, rainwater recycling system, emergency rescue and disaster relief, urban water supply enterprises and government institutions water lifting. 

Supplies: one outlet companion flange, one gasket seal, one instruction, one guarantee card,

One certification, one wooden case.

Packaging:

The pump and motor are packed in one case if the total height of the full set is less than 3.2m. Contrarily, the pump and motor are respectively packed. If the customer has no special requirement, we usually pack the products with wooden cases.

Attention:

For the convenience and quality, all the related products are manufactured by us. The following products:

a. All kinds of lifting pipes including ratio-frequency welded pipes (dia.25mm-500mm); connect type: flanged connection, screwed connection and clamp connection. They are made accurately by machine tools.

b. Pipe clamp: the length is 50mm-500mm (span as required).

c. Wellhead devices including recharge wellhead (applied to earth source heat pump), regular base plate with advanced manufacturing technique.

d. Demander: Avoiding blocking and polluting by sand in water. And it contributes to long service life.

e. Related products: submersible cable, starting cabinet, frequency conversion cabinet, transformer, electric generating set ,etc.

f. According to the conditions on the spot, we also supply the design proposals about pipe network, tank and installation.