High quality rod end bearing GE80ES-2RS

High quality rod end bearing GE80ES-2RS

1) Male and female
2) Left and right hand threaded
3) Metric and inches sizes

1.Features:

1) Can bear high load. According to its different types and structures, rod end bearing can bear radial   load, axial load as well as two kinds of loads together.

2) Spherical outside surface of inner ring is lined with composite, so it is self-lubricating.

3) Rod end bearings has shock resistance, because of its spherical sliding large contact area, large dip angle and special craft processing method, such as lamenting, zincing, chroming or lining of outside  sliding surface, spraying and so on.

4) Rod end bearing has the resistance of corrosion, abrasion. It also can be self-aligning, self-lubricating, so it can work normally even though installed improperly.

5) Material: Surface of rod body zinc plated. rod body with a lubricating hole or grease nipple.

6) Packing: Standard packing also can according to customers requirement.

2.Technical performance:

1) Working temperature: -30°C~+80°C

2) Angle of inclination: 3°~15° (angular contact rod end bearing: 2°~3°; thrust rod end bearing: 6°~9°)

3.Application:

Generally it is suitable for pendulum motion (angular motion) with low speed. Widely used in the industry of engineering hydraulic oil cylinder, metal forming machine, engineering machinery, automation equipment, auto damper, Water Conservancy Machine and so on.

4.The catalogue of Rod End Bearing:

PHS5--PHS30.                         POS5--POS30

 PHSA6--PHSA30                      POSA6---POSA30

 SI5E----SI12E                        SI15ES---SI80ES

 SA5E----SA12E                        SA15ES----SA80ES

 SIB6F/K---SIB35F/K                  SAB6F/K----SAB35F/K

PHSB3----PHSB16                    POSB3-----POSB16