drilling monoblock control valve

monoblock control valve DCV40 

Main technical data for DCV40 series monoblock control valve as follows:

1.Nominal.Flow:40L/min(=10.57GPM=10.57U.S.gal)

2.Max.Flow:60L/min(=15.85GPM=15.85U.S.gal)

3.Max.Pressure:350bar(=5075psi=35Mpa)

4.Thread(standard):G1/2”(we normally provide with BSPP thread,other special thread on require)

5.Backpressure in outlet sections:60bar

6.Working sections:1 to 7 all be ok

7.Spool stroke:+5~-5mm

8.Parallel circuit(other circuit,such as tandem circuit on request)

9.Low internal leakages

10.High strength cast iron body

11.Nickel plated spools

12.100% tested products before shipment

13.ISO 9001 approved

14.Good quality,timely service

15.Factory directly sales

Introduction about QTfluid company and products

QTfluid(Shanghai)Tech.Co., was built in 2001.We specialize in the design,R&D,manufacture and sale of hydraulic valves.Our main products have been divided into two big parts,monoblock valve and sectional valve.

At present time,we could provide you 5 series of monoblock valve and 10 series of sectional valve,for each series and each valve,we can provide different control style,such as handle control(manual control),detent control,

pneumatic control,double control,electrohydraulic ON-OFFcontrol,cable remote control,hydraulic control and so on.

Application

Our products are used in construction,agriculture and machinery,special vehicle for environment sanitation,oil equipment,spaceflight and military area.

The picture we showed is our monoblock control valve of DCV40/2 with manual control.

If there is anything we can help you,please contact with us in time,we will be more than happy to help and support you in any way we can.