Air Classifier products from China (Mainland),buy Air Classifier from seekpart.com

Specifications

Air Classifier

Operating principle:

Classifier, together with cyclone separator, bag filter and radial fan, forms a closed loop system for powder classification. Under the suction force of radial fan, feed materials are brought with uprising air stream into classifying chamber from feed inlet of classifier. Under strong centrifugal forces of high-speed rotating turbo wheels, coarse and fine materials are separated. Coarse materials, together with some fine materials, lose speed after bumping against wall and fall to secondary draught. Because of the strong washing of the secondary air flow , coarse and fine materials are separated once again. Fine materials go up to classifying cavity to be classified continuously, while coarse powders fall down to discharging outlet and come out or go back to mill.

Performances and features:

- Suitable for accurate particle classification of dry micro-products with spherical, needle-like or flake shape and different densities.

- Particle size adjustable between d97: 2um and d97: 150um.

- Classifying rate can reach 60%-85%. The better the fluidity is, the higher the classifying efficiency, otherwise it will be lower.

- Horizontal classifying turbo-wheel, high rotating speed, accurate top point cutting.

- To connect with ball mill, vibration mill and rolling mill to form a closed circuit.

- With SCADA and programmable control system, real-time operation status and simple operation.

- Operate under negative pressure. Dust emission from exhaust air less than 40mg/m³. Noise from exhaust air is lower than 75dB (A) through silencer.

Multi-rotor:

Type	FW400/3	FW400/4	FW400/6	FW630/3	FW630/4	FW630/6	FW800/3	FW800/4	FW800/6
Throughout T/h	0.2-1.5	0.3-2	0.5-3	1-5	2-8	3-10	2-8	3-10	5-15
Particle Szie d97: um	2-45	2-45	2-45	3-45	3-45	3-45	4-45	4-45	4-45
Efficiency %	60-80	60-80	60-80	60-80	60-80	60-80	60-80	60-80	60-80
Power kw	90-110	120-140	170-200	135-155	170-190	250-290	180-200	220-290	290-390

Single-rotor:

Type	FW200	FW280	FW400	FW520	FW630	FW800
Throughout kg/h	10-100	20-200	50-500	100-1500	200-2000	400-4000
Particle Size d97:um	2-45	2-45	2-45	3-45	3-45	3-45
Efficiency %	60-80	60-80	60-80	60-80	60-80	60-80
Power kw	7-11	15-19	21-28	23-30	52-60	67-77

If you have any question, please call Mark at (Tel. NO) 0086-1866-1699-460.

View the Seller's ProductsCompany Other Products

Vibration Mill

Details: Operating principles:Under the state of high-frequency vibrations of shocker (or vibration motor) with high speed, grinding medias (rods, sticks and balls)in grinding cavity launch strongly, rotat...

Coanda Jet Classifier

Details: Coanda Jet Classifier Features Ideal for Abrasive or High Purity PowdersThe Elbow-Jet Air Classifier contains no rotating parts: compared to conventional rotary (centrifugal) classifiers, abrasiv...