Cylinder pc200-5 is an important kind of hydraulic cylinder. It is a standard product and the structure is piston cylinder. The body is usually made of steel and the power is hydraulic. It has some specifications. Shaft diameter is from 60 mm to 110 mm; Min operating pressure is less than 0.5 Mpa; Max working pressure is 40 Mpa and so forth.
Moreover, cylinder pc200-5 consists of seven parts, there are cylinder barrel, cylinder bottom or cap, cylinder head, piston, piston rod, rod gland and other parts. It is usually called a linear hydraulic motor and is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. It has many applications, notably in engineering vehicles. A hydraulic cylinder is the actuator or "motor" side of this system. It gets their power from pressurized hydraulic fluid, which is typically oil. The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on each end by the cylinder bottom (also called the cap end) and by the cylinder head where the piston rod comes out of the cylinder. The piston has sliding rings and seals.
Finally, in order to meet different requirements, there are some types of cylinder pc200-5. sk200-6 is an important one. It is widely used in many fields.