processingdetails

Hand Engraving

Hand Engraving can be described as the process in which a hardened, shaped, and sharpened piece of steel, calling as graver, is pushed through the metal's surface. In the process of hand engraving, three methods can be selected to be used: by hand pressure (push graver), with a small lightweight hammer and chisel (graver), or with a pneumatic air-driven hammer. Pneumatic AirGravers emulate both the hammer and chisel and the push-graver technique. The graver is ground to a pointed shape adhering to very specific angles. These angles allow the graver to properly enter the metal surface and travel forward, continuously curling the metal directly in front of the graver face, while leaving behind a small furrow.

The shape of the graver and the angle at which it is held will ultimately decide the furrow shape. The angle can and will often be continuously altered during the process, allowing for the furrow to contain thick and thin graduations of the cut line. If a square-shaped graver is used so that one if its corners enters the metal, it will produce a "V"-shaped furrow. Many graver shapes are available, each leading to a particular style of engraving, and each producing a different result. Usually, the two favored shapes are the "V" and the flat gravers. Personal preference plays a significant role in choosing the tool used.

When using the hammer and chisel method, both hands are required; one to hold the graver, and the other to deliver light hammer impacts against the graver, driving it forward through the material being cut.

With the push graver method, the graver is generally fitted to a small wooden handle held in the palm. The graver remains stationary, and the item being engraved is held firmly and fed into the graver's tip, or rotated into it when a circular or curved line is desired. When making a straight line, the graver is pushed forward using only hand pressure. Each of these methods requires a rotating vise, or a similar holding device, to hold the item being engraved.