| Bearing Model Data |
HongKong LGC Gas Equipment Co., Ltd
China ECU Manufacturer, professional LPG/CNG Conversion Kits Supplier
Hongkong LGC Gas Equipment Co., Ltd was established in 2006 with factory and office in Shenzhen China; dedicated to Bi-fuel(Petrol to CNG/LPG) electric control system for vehicles.
In 2008, Our factory start manufacturing ECU for autogas conversion systems. The ECU support different languages, suitable for sequential injection-3/4/6/8 cylinders engines. The factory have very good quality control on the products, Quality of the ECU has been approved by ECE 67R-01 regulation.
What can LGC offer to you?

1. As China manufacturer of ECU and professional LPG/CNG conversion kits supplier, We can offer you complete solution of autogas conversion kits, suitable for Electronic fuel injection(EFI) engine, Carburetor engine:

- CNG/LPG sequential injection system conversion kits:
Autogas Tanks/Cylinders, cng high pressure steel pipe/tube, ECU(Eletronic Control Unit) including Map Sensor, Water temperature Sensor, Pressure reducer/regulator/vaporizer, Gas Filter, Injector Rail, CNG Solenoid Valves, CNG Pressure Gauge, and accessories, etc.
- CNG/LPG traditional system conversion kits:
CNG Single-point reducer, LPG Evaporator, Emulator/Simulator, Mixer, etc.
All our products are complied with International Standard ISO9000:2000, quality are favoured by our domestic and abroad distributors/installation factories.
2. We can offer you Excellent service:
- 1 year warranty for key components;
- Technical support by sending out our engineers under certain conditions;
- Fast response and considerate sales service.
3. We can offer you stable quality at competitive price
After years of rapid development, We've built up a wide sales network in China, and have exported to Malaysia and Thailand yet. In future, we will do better and make LGC famous in the world.
Our mission
We contribute to energy saving and keeping the living environment more green.
Warmly welcome worldwide friends to join us!
2006    LGC was established in Shenzhen China, dedicated to LPG/CNG autogas equipment;
2008    Our factory start manufacturing ECU for bi-fuel vehibcle;
2011    After years of rapid development, LGC have established a wide sales network in north China and have exported to Thailand and Malaysia, in future we will focus on oversea market, endeavor to make LGC famous in the world.





Buy LPG/CNG conversion kits? Choose China, choose LGC!
1. Chose China--Good quality, good price
As known to all, the autogas conversion products and technology originate from Italy, and spread to others countries included China. With development these years, the autogas technology in China has become mature. Chosing "made in China" will mean that you will get competitive advantage on quality and price.

Although the RMB-USD rate is dropping, China can still remain its advantage in manufacturing industry, the labor cost is low still and manufacturing ability level is still higher than many other developing countries, which is the garantee of good quality at lower price.
2. Chose LGC--Your well cooperated supply partner, complete solution provider
We will be your good supply partner, saving you time and cost.
We provide you one-stop service, complete solution of full set LPG/CNG conversion kits.
As known, a full set conversion kits include ten above items, there is no a single supplier in the world who can manufacture all items by his own(LGC manufacture only ECU now, and maybe injector in 2012). If you want to find real manufacturers for every item kits you may have to contact with a dozen factories!
Since established, LGC are always chosing its cooperated partners. We worked with many China manufacturer partners before, many of them were eliminated by time yet, now the remained ones are tested and proved to be good to us. Good suppliers does not mean only cheap cheap price, but balance between quality, price, and service.
Choose LGC, then you don't need to spend time and energy to verify a dozen of suppliers^^
Rely on LGC, save your time and cost!

lgc.jpgHongkong LGC Gas Equipment Co., Ltd
"China ECU Manufacturer, professional LPG/CNG Conversion Kits Supplier"

Send your message to this supplier

-Enter between 20 to 3,000 characters, English only.

Contact Details

Contact person:Arnold Chung

Country:China (Mainland)



Street address: Room 719A, Huang Jia Centre, Dong Huan Road 1, Long Hua Area, Shenzhen, China




About Us - Service - Payment - Links-Free Products - Contact Us - Sitemap - Add to favorite

[Hangzhou]+86-571-85317554 ©2010 seekpart.com,License: icp