| Bearing Model Data |

YuanCheng" brand series of whole surface epoxy coated resilient sealed gate valves were designed by international advanced technology according to international advanced standards as American Standard ANSI/AWWAC509, England Standard BS5163 and German Standard DIN3202. There are 3 grades: 1.0Mpa, 1.6Mpa and 250PSI. This product adopts high strength gray cast iron, ductile iron as pressure bearing parts which has higher pressure bearing capacity to suit the requirements of continuous pressure rising in city water supply pipes network and automatic fire-fighting water spray network. This product can take place of the 1.6Mpa steel gate valves used in city water supply pipes network, high buildings water supply and water drainage system, water spray fire-fighting system. The rust rate of steel gate valve is 2 to 3 times more than that of iron gate valve, the severe industrial rust will put the valves which has been used in long time opening and closing state into great trouble. It is difficult to open and shut again. These steel gate valves will also cause severe rust pollution. This is why the water tap will give out long time rusty water in some hotels which have not enough customers. The rust will pollute the water, and the rusty water will destroy the environment and cause the water containers full of rusty spots. All problems will be solved using our above product


moreProducts Showcase

Send your message to this supplier

-Enter between 20 to 3,000 characters, English only.

Contact Details

Contact person:wu

Country:China (Mainland)



Street address: 3999,Weizhou Road,FangZi District,


Mobile:No registration

Fax:86 -536-7662283


About Us - Service - Payment - Links-Free Products - Contact Us - Sitemap - Add to favorite

[Hangzhou]+86-571-85317554 ©2010 seekpart.com,License: icp