Four way ball valve refers to the Ball Valve which known as side-mounted split-type, there are two kinds of two-and three-step structure with the valve body along the channel with vertical axis, asymmetric cross-section is divided into about two and a half years, it's in the pipeline mainly used to cut off, distribution and change the media flows. Pivot its structure to ensure the accurate location of the ball. Standard seat structure using a spring, will push the ball valve seat to ensure a good sealing performance of low pressure. The valve ball before the valve can be sealed after the valve seat, the so-called two-way sealing characteristics, the use of built-in relief valve, valve body cavity may be out of emissions. The valve Begins with the protection of the use of anti-stem structure, low coefficient of friction of the bearings and so on.
In most cases, the four way ball valve can be designed or manufactured according to several accepted standards, such as ISO 9001, API 6D, API 607, etc. The materials such as WCB, WC6, WC9, LCB, CF8, CF3, CF8M, CF3M, etc. are applied to manufacture the four way ball valve. The Applicable media of the four way ball valve contains Water, Steam, Oil, Some acids/bases, etc. The four way ball valve can be widely used in the fields of oil or gas storage/transmission, chemical, metallurgical, paper making, pharmaceutical, food, etc. With different demands, the valves could be used in open-qir explosion-proof, etc adverse or hazardous circumstances with personal safety and emergency shut-off, the integral design ensures coordination between actuator and valve, and also facilitates us better services for customers. In addition, the main Place of Origin is Zhejiang China (Mainland) and the working conditions of the valve are Medium Pressure, Manual and Medium Temperature.